Hinges

Continuous Hinge With Holes -
for Screw-On Mounting

Continuous hinge (piano hinge) with recessed holes for screw-on mounting. Universal left and right mounting. Supplied in custom cut lengths where this measurement (L) is stated in millimeters and inserted instead of -LLLL at the end of the part number. For example: P/N 3520-110720-0852 is supplied in lengths of 852 mm. Minimum order quantities applies on custom cut lengths.

Also available in standard length of 3500 mm.

  • Steel, zinc plated, with steel pin.
  • Version without holes, for weld-on mounting, see page 3-830.
  • Stainless version: See page 6-550.

The J-measurement describes the largest diameter of the countersunk and not the diameter of the hole.


Continuous Hinge With Holes - for Screw-On Mounting
B= J=

C=0,7 mm
E=1,75 mm
G=60,4 mm
K=15 mm

C=1,0 mm
E=1,75 mm
G=60,5 mm K=15 mm

C=1,25 mm
E=2,5 mm
G=90 mm
K=30 mm

C=1,5 mm
E=3,0 mm
G=90 mm
K=30 mm

C=2,0 mm
E=6,0 mm
G=90 mm
K=30 mm

C=3,0 mm
E=6,0 mm
G=90 mm
K=30 mm

20 3,5 3520-110720-LLLL - - - - -
25 3,5 3520-110725-LLLL 3520-111025-LLLL - - - -
28 4,0 3520-110728-LLLL 3520-111028-LLLL - - - -
32 4,5 3520-110732-LLLL 3520-111032-LLLL 3520-121232-LLLL 3520-131532-LLLL - -
40 5,4 3520-110740-LLLL 3520-111040-LLLL 3520-121240-LLLL 3520-131540-LLLL 3520-162040-LLLL -
50 6,0 3520-110750-LLLL 3520-111050-LLLL 3520-121250-LLLL 3520-131550-LLLL 3520-162050-LLLL 3520-163050-LLLL
60 6,5 - - 3520-121260-LLLL 3520-131560-LLLL 3520-162060-LLLL 3520-163060-LLLL
70 6,8 - - - - 3520-162070-LLLL 3520-163070-LLLL
80 7,0 - - - - 3520-162080-LLLL 3520-163080-LLLL
100 7,5 - - - - 3520-162010-LLLL 3520-163010-LLLL

3-820