Hinges

Continuous Hinge Without Holes -
for Weld-On Mounting

Continuous hinge (piano hinge) without holes, for weld-on mounting. Universal left and right mounting. Supplied in custom cut lengths where this measurement (L) is stated in millimeters and inserted instead of -LLLL at the end of the part number. For example: P/N 3520-010720-0852 is supplied in lengths of 852 mm. Minimum order quantities applies on custom cut lengths.

Also available in standard length of 3500 mm.

  • Steel, unplated. With steel pin.
  • Stainless version: Page 6-560.
  • Steel version with holes: Page 3-820.
Continuous Hinge Without Holes - for Weld-On Mounting
B=

C=0,7 mm
E=1,75 mm
K=15 mm

C=1,0 mm
E=1,75 mm
K=15 mm

C=1,25 mm
E=2,5 mm
K=30 mm

C=1,5 mm
E=3,0 mm
K=30 mm

C=2,0 mm
E=6,0 mm
K=30 mm

C=3,0 mm
E=6,0 mm
K=30 mm

20 3520-010720-LLLL 3520-011020-LLLL - - - -
25 3520-010725-LLLL 3520-011025-LLLL - - - -
28 3520-010728-LLLL 3520-011028-LLLL - - - -
32 3520-010732-LLLL 3520-011032-LLLL 3520-021232-LLLL 3520-031532-LLLL - -
40 3520-010740-LLLL 3520-011040-LLLL 3520-021240-LLLL 3520-031540-LLLL 3520-062040-LLLL 3520-063040-LLLL
50 3520-010750-LLLL 3520-011050-LLLL 3520-021250-LLLL 3520-031550-LLLL 3520-062050-LLLL 3520-063050-LLLL
60 - - 3520-021260-LLLL 3520-031560-LLLL 3520-062060-LLLL 3520-063060-LLLL
70 - - 3520-021270-LLLL 3520-031570-LLLL 3520-062070-LLLL 3520-063070-LLLL
80 - - - 3520-031580-LLLL 3520-062080-LLLL 3520-063080-LLLL
100 - - - - 3520-062010-LLLL 3520-063010-LLLL

3-830