Stainless steel

Continuous Hinge With Holes for Screw-On Mounting

Continuous stainless steel hinge ("piano hinge") with recessed holes suitable for screw-on mounting. Supplied in custom lengths according to your choice. The length "L" is stated in millimeters and inserted in the last positions of the part number, instead of the -LLLL. For instance, part number 3530-110720-0852 is 852 mm long.

Minimum order quantities applies when ordering custom lengths. Also available in standard length of 3 500 mm.

  • Stainless steel (304).
  • Steel version: Page 3-820.
  • Version without holes: Page 6-560.

The J-measurement describes the largest diameter of the countersunk and not the diameter of the hole.

Continuous Hinge with Holes - for Screw-On Mounting
B= J=

C=0,7 mm
E=1,75 mm
G=60,4 mm
K=15 mm

C=1,0 mm
E=1,75 mm
G=60,5 mm
K=15 mm

C=1,25 mm
E=2,5 mm
G=90 mm
K=30 mm

C=1,5 mm
E=3,0 mm
G=90 mm
K=30 mm

C=2,0 mm
E=6,0 mm
G=90 mm
K=30 mm

C=3,0 mm
E= 6,0 mm
G=90 mm
K=30 mm

20 4,0 3530-110720-LLLL 3530-111020-LLLL - - - -
25 4,2 3530-110725-LLLL 3530-111025-LLLL - - - -
28 4,8 3530-110728-LLLL 3530-111028-LLLL - - - -
32 5,0 3530-110732-LLLL 3530-111032-LLLL 3530-121232-LLLL 3530-131532-LLLL - -
40 5,4 3530-110740-LLLL 3530-111040-LLLL 3530-121240-LLLL 3530-131540-LLLL 3530-162040-LLLL 3530-163040-LLLL
50 6,0 3530-110750-LLLL 3530-111050-LLLL 3530-121250-LLLL 3530-131550-LLLL 3530-162050-LLLL 3530-163050-LLLL
60 6,5 - - 3530-121260-LLLL 3530-131560-LLLL 3530-162060-LLLL 3530-163060-LLLL
70 6,8 - - - 3530-131570-LLLL 3530-162070-LLLL 3530-163070-LLLL
80 7,0 - - - - 3530-162080-LLLL 3530-163080-LLLL
100 7,5 - - - - 3530-162010-LLLL 3530-163010-LLLL

6-550